Add device via Android
Operating steps
1.Install the SANSI smart luminaire and switch it on.
2.Download the App “Stellar Wi-Fi”, Open the App, register an account and log in.
3.On the top right of the interface “Shortcuts” or “Devices”, tap "+" and then “Add devices” to access the interface of adding the new devices.。
4.Choose the product type of your device to be added.
5.Make sure the device has been correctly installed. Tap “Next”.
6.Make sure the device is ready for connecting. Tap “Yes”.
7.Tap the required device to access the next step, as following:
8.The App switches automatically to the interface “Prepare for networking”. Input the designation and password of the desired Wi-Fi network, and then tap “Connection”.
9.If the indicated Wi-Fi network is not the desired one for the device, tap “Select Wi-Fi” to switch to other Wi-Fi networks.
Do not use a 5G network Wi-Fi. It is not compatible with this device.
10.The configuration of the network connection takes approximately 60 - 90 seconds. If it shows the interface of “Successful”, input the device designation, choose the application location and then tap “Confirm”. The device is now successfully added. You can find the added device on the interface “Devices” and control it。
11.If it shows the interface of “Connection failed”, tap “Try again” to repeat the operating steps of adding a new device.
[Why it always shows “Connection failed” during adding the device?](/en/stellar_wifi/faq/#Why it always shows )